Brandon LiandClaude Opus 5
4288d8c298
Instances were started by hand and updated by hand, so they drifted behind master silently. Now: PM2 supervises the dashboard and the clicker, a logon task brings them up, and a 5-minute task pulls, rebuilds and restarts when master moves. Restarting on every push is only safe because the scheduler now survives it. It was pure in-memory state (_global.__autoTrader), so any restart silently stopped automated trading with the dashboard simply showing it as off. It now mirrors running/action/symbol/stopAfterAll to the settings table, and resumeSchedulerIfPersisted() picks it back up from the getClients() bootstrap. No sync-wait was needed there: tick() already skips while a client reports !syncComplete and while any account holds a position. A failed build is never deployed — the build runs before anything restarts, so a broken push leaves the previous build serving. start-all and update-check both warm the app with a request afterwards. That is load-bearing: getClients() is lazily bootstrapped, so until something makes an HTTP request the Tradovate clients, the reporter and the resumed schedule never start. That was already true of manual restarts. Logic lives in Node so a macOS or Linux port only needs an equivalent of install-autostart.ps1. Python deps are hash-guarded, so the common path is one hash and one import with no network, and failure is non-fatal since only the clicker needs them. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
365 lines
13 KiB
Batchfile
365 lines
13 KiB
Batchfile
@echo off
|
|
setlocal EnableExtensions
|
|
title AutoFirmer - Windows setup
|
|
|
|
REM ============================================================================
|
|
REM AutoFirmer instance setup for Windows.
|
|
REM
|
|
REM Standalone: drop this file anywhere and run it. It clones the repo into a
|
|
REM subfolder next to itself, installs, builds, and points the instance at the
|
|
REM master dashboard. Safe to re-run - it pulls and rebuilds instead of cloning.
|
|
REM ============================================================================
|
|
|
|
set "REPO_URL=https://git.juicerroom.com/senofy/autofirmer-expanded.git"
|
|
set "DEFAULT_MASTER=https://master.juicerroom.com"
|
|
set "TARGET=%~dp0autofirmer"
|
|
|
|
echo.
|
|
echo ============================================
|
|
echo AutoFirmer - Windows setup
|
|
echo ============================================
|
|
echo.
|
|
|
|
REM ---------------------------------------------------------------- git check
|
|
REM Git for Windows only lands on PATH if "Git from the command line" was chosen
|
|
REM at install time, and an already-open cmd keeps its old PATH regardless. So:
|
|
REM probe the usual homes, then offer to install, then probe again - a fresh
|
|
REM install is never visible to `where` in this session.
|
|
:git_probe
|
|
where git >nul 2>&1
|
|
if not errorlevel 1 goto :git_done
|
|
if exist "%ProgramFiles%\Git\cmd\git.exe" set "PATH=%ProgramFiles%\Git\cmd;%PATH%"
|
|
if exist "%ProgramFiles(x86)%\Git\cmd\git.exe" set "PATH=%ProgramFiles(x86)%\Git\cmd;%PATH%"
|
|
if exist "%LOCALAPPDATA%\Programs\Git\cmd\git.exe" set "PATH=%LOCALAPPDATA%\Programs\Git\cmd;%PATH%"
|
|
where git >nul 2>&1
|
|
if not errorlevel 1 goto :git_found_offpath
|
|
if "%GIT_TRIED%"=="1" goto :git_missing
|
|
where winget >nul 2>&1
|
|
if errorlevel 1 goto :git_missing
|
|
echo.
|
|
echo [--] Git is not installed.
|
|
set "DOIT="
|
|
set /p "DOIT= Install it now with winget? [Y/n] "
|
|
if /i "%DOIT%"=="n" goto :git_missing
|
|
set "GIT_TRIED=1"
|
|
echo Installing Git ^(a UAC prompt may appear^)...
|
|
winget install --id Git.Git -e --source winget --accept-source-agreements --accept-package-agreements --silent
|
|
goto :git_probe
|
|
|
|
:git_found_offpath
|
|
echo [ok] git ^(found off PATH, added for this run^)
|
|
goto :git_done
|
|
|
|
:git_missing
|
|
echo [X] Git not found on PATH, and not in any of:
|
|
echo %ProgramFiles%\Git\cmd
|
|
echo %LOCALAPPDATA%\Programs\Git\cmd
|
|
echo.
|
|
echo Install it from https://git-scm.com/download/win
|
|
echo If you JUST installed it: close this window, open a new Command
|
|
echo Prompt and run the script again - an open window keeps its old PATH.
|
|
goto :fail
|
|
|
|
:git_done
|
|
echo [ok] git
|
|
|
|
REM --------------------------------------------------------------- node check
|
|
REM winget's LTS package is deliberate: better-sqlite3 publishes prebuilt
|
|
REM binaries for LTS Node, so installing LTS sidesteps the node-gyp build.
|
|
:node_probe
|
|
where node >nul 2>&1
|
|
if not errorlevel 1 goto :node_found
|
|
if exist "%ProgramFiles%\nodejs\node.exe" set "PATH=%ProgramFiles%\nodejs;%PATH%"
|
|
if exist "%LOCALAPPDATA%\Programs\nodejs\node.exe" set "PATH=%LOCALAPPDATA%\Programs\nodejs;%PATH%"
|
|
where node >nul 2>&1
|
|
if not errorlevel 1 goto :node_found
|
|
if "%NODE_TRIED%"=="1" goto :node_missing
|
|
where winget >nul 2>&1
|
|
if errorlevel 1 goto :node_missing
|
|
echo.
|
|
echo [--] Node.js is not installed.
|
|
set "DOIT="
|
|
set /p "DOIT= Install Node 22 LTS now with winget? [Y/n] "
|
|
if /i "%DOIT%"=="n" goto :node_missing
|
|
set "NODE_TRIED=1"
|
|
echo Installing Node LTS ^(a UAC prompt may appear^)...
|
|
winget install --id OpenJS.NodeJS.LTS -e --source winget --accept-source-agreements --accept-package-agreements --silent
|
|
goto :node_probe
|
|
|
|
:node_missing
|
|
echo [X] Node.js not found on PATH, and not in any of:
|
|
echo %ProgramFiles%\nodejs
|
|
echo %LOCALAPPDATA%\Programs\nodejs
|
|
echo.
|
|
echo Install Node 22 LTS from https://nodejs.org/ then re-run.
|
|
echo If you JUST installed it, open a NEW Command Prompt first.
|
|
goto :fail
|
|
|
|
:node_found
|
|
if exist "%ProgramFiles%\nodejs\node.exe" set "PATH=%ProgramFiles%\nodejs;%PATH%"
|
|
if exist "%LOCALAPPDATA%\Programs\nodejs\node.exe" set "PATH=%LOCALAPPDATA%\Programs\nodejs;%PATH%"
|
|
where node >nul 2>&1
|
|
if not errorlevel 1 goto :node_found
|
|
echo [X] Node.js not found on PATH, and not in any of:
|
|
echo %ProgramFiles%\nodejs
|
|
echo %LOCALAPPDATA%\Programs\nodejs
|
|
echo.
|
|
echo Install Node 22 LTS from https://nodejs.org/ then re-run.
|
|
echo If you JUST installed it, open a NEW Command Prompt first.
|
|
goto :fail
|
|
:node_found
|
|
for /f "tokens=* usebackq" %%v in (`node -p "process.versions.node"`) do set "NODEVER=%%v"
|
|
for /f "tokens=1 delims=." %%m in ("%NODEVER%") do set "NODEMAJOR=%%m"
|
|
echo [ok] node v%NODEVER%
|
|
|
|
REM better-sqlite3 ships prebuilt binaries only for released Node ABIs. On a
|
|
REM newer major it falls back to node-gyp, which needs Visual Studio Build
|
|
REM Tools - a long, confusing failure if it is not installed.
|
|
if %NODEMAJOR% GEQ 23 goto :node_warn
|
|
goto :node_ok
|
|
|
|
:node_warn
|
|
echo.
|
|
echo [!] Node %NODEMAJOR% is newer than better-sqlite3's prebuilt binaries.
|
|
echo Install may try to compile from source and fail without Visual
|
|
echo Studio Build Tools. Node 22 LTS is the safe choice here.
|
|
echo.
|
|
set "GOON="
|
|
set /p "GOON= Continue anyway? [y/N] "
|
|
if /i not "%GOON%"=="y" goto :fail
|
|
:node_ok
|
|
|
|
REM ------------------------------------------------------------------- python
|
|
REM Only the clicker needs Python; the dashboard runs without it.
|
|
REM
|
|
REM Detection is deliberately "run it and see" rather than `where python`:
|
|
REM Windows ships a stub python.exe in WindowsApps that only opens the Microsoft
|
|
REM Store. `where` finds it, running it does nothing useful. Asking it to print
|
|
REM its major version separates a real interpreter from the stub. The py
|
|
REM launcher is preferred when present - it is not shadowed by the stub.
|
|
:py_probe
|
|
set "PYCMD="
|
|
for /f "tokens=*" %%v in ('py -3 -c "import sys;print(sys.version_info[0])" 2^>nul') do if "%%v"=="3" set "PYCMD=py -3"
|
|
if not defined PYCMD for /f "tokens=*" %%v in ('python -c "import sys;print(sys.version_info[0])" 2^>nul') do if "%%v"=="3" set "PYCMD=python"
|
|
if defined PYCMD goto :py_found
|
|
if "%PY_TRIED%"=="1" goto :py_skip
|
|
where winget >nul 2>&1
|
|
if errorlevel 1 goto :py_skip
|
|
echo.
|
|
echo [--] Python is not installed ^(needed only for the clicker^).
|
|
set "DOIT="
|
|
set /p "DOIT= Install Python 3.12 now with winget? [Y/n] "
|
|
if /i "%DOIT%"=="n" goto :py_skip
|
|
set "PY_TRIED=1"
|
|
echo Installing Python ^(a UAC prompt may appear^)...
|
|
winget install --id Python.Python.3.12 -e --source winget --accept-source-agreements --accept-package-agreements --silent
|
|
goto :py_probe
|
|
|
|
:py_skip
|
|
echo [--] python not found - the dashboard will still work.
|
|
echo Needed only for the clicker ^(clicker\runner.py^).
|
|
goto :py_end
|
|
|
|
:py_found
|
|
for /f "tokens=*" %%v in ('%PYCMD% -c "import sys;print(sys.version.split()[0])" 2^>nul') do set "PYVER=%%v"
|
|
echo [ok] python %PYVER% ^(via "%PYCMD%"^)
|
|
:py_end
|
|
|
|
REM ------------------------------------------------------------------- prompts
|
|
echo.
|
|
set "MASTER_URL="
|
|
set /p "MASTER_URL= Master dashboard URL [%DEFAULT_MASTER%]: "
|
|
if "%MASTER_URL%"=="" set "MASTER_URL=%DEFAULT_MASTER%"
|
|
|
|
set "INSTANCE="
|
|
set /p "INSTANCE= Instance name [%COMPUTERNAME%]: "
|
|
if "%INSTANCE%"=="" set "INSTANCE=%COMPUTERNAME%"
|
|
|
|
echo.
|
|
echo Installing to: %TARGET%
|
|
echo.
|
|
|
|
REM -------------------------------------------------------------- clone / pull
|
|
REM The branch is named explicitly throughout. A bare `git clone` follows the
|
|
REM remote's default branch, which is not necessarily master - and an existing
|
|
REM checkout may be sitting on a stale branch from before that was corrected.
|
|
if exist "%TARGET%\.git" goto :repo_update
|
|
echo [1/6] Cloning %REPO_URL% ...
|
|
git clone --branch master "%REPO_URL%" "%TARGET%"
|
|
if errorlevel 1 goto :clone_failed
|
|
goto :repo_ready
|
|
|
|
:clone_failed
|
|
echo [X] Clone failed. Check network access to git.juicerroom.com.
|
|
goto :fail
|
|
|
|
:repo_update
|
|
echo [1/6] Existing checkout found - switching to master and pulling...
|
|
pushd "%TARGET%"
|
|
git fetch origin
|
|
if errorlevel 1 goto :pull_failed
|
|
git checkout master
|
|
if errorlevel 1 goto :pull_failed
|
|
git pull --ff-only origin master
|
|
if errorlevel 1 goto :pull_failed
|
|
popd
|
|
goto :repo_ready
|
|
|
|
:pull_failed
|
|
popd
|
|
echo [X] Could not update the checkout. If you have local changes, either
|
|
echo commit them or delete this folder and re-run to clone fresh:
|
|
echo %TARGET%
|
|
goto :fail
|
|
|
|
:repo_ready
|
|
|
|
pushd "%TARGET%"
|
|
|
|
REM ------------------------------------------------------------------- install
|
|
echo.
|
|
echo [2/6] Installing npm dependencies ^(this takes a few minutes^)...
|
|
REM playwright is declared but unreferenced anywhere in the source; skipping its
|
|
REM browser download saves several hundred MB and a lot of time.
|
|
set "PLAYWRIGHT_SKIP_BROWSER_DOWNLOAD=1"
|
|
call npm install
|
|
if errorlevel 1 (
|
|
echo.
|
|
echo [X] npm install failed.
|
|
echo If the error mentions node-gyp, MSBuild, or better_sqlite3.cpp,
|
|
echo the native module could not find a prebuilt binary. Either switch
|
|
echo to Node 22 LTS, or install "Desktop development with C++" from the
|
|
echo Visual Studio Build Tools installer.
|
|
popd
|
|
goto :fail
|
|
)
|
|
|
|
REM --------------------------------------------------------------------- build
|
|
echo.
|
|
echo [3/6] Building...
|
|
call npm run build
|
|
if errorlevel 1 (
|
|
echo [X] Build failed.
|
|
popd
|
|
goto :fail
|
|
)
|
|
|
|
REM ------------------------------------------------------------------ settings
|
|
echo.
|
|
echo [4/6] Writing instance settings...
|
|
node scripts\seed-settings.js "%MASTER_URL%" "%INSTANCE%"
|
|
if errorlevel 1 (
|
|
echo [X] Could not write settings to autotrader.sqlite.
|
|
popd
|
|
goto :fail
|
|
)
|
|
REM Record the interpreter resolved above. The Node helpers read this rather
|
|
REM than repeating the Store-stub detection in a second language.
|
|
if defined PYCMD echo %PYCMD%> scripts\.python-cmd
|
|
|
|
REM ------------------------------------------------------ python deps (option)
|
|
echo.
|
|
if not defined PYCMD goto :deps_skip
|
|
echo [5/6] Installing clicker Python dependencies...
|
|
REM requirements.txt guards its pyobjc entries with sys_platform == "darwin",
|
|
REM so on Windows this resolves to pyautogui and its wheels only.
|
|
%PYCMD% -m pip install --upgrade --quiet --disable-pip-version-check pip
|
|
%PYCMD% -m pip install --quiet --disable-pip-version-check -r clicker\requirements.txt
|
|
if errorlevel 1 goto :deps_failed
|
|
%PYCMD% -c "import pyautogui" 2>nul
|
|
if errorlevel 1 goto :deps_failed
|
|
echo pyautogui imports cleanly.
|
|
goto :deps_done
|
|
|
|
:deps_failed
|
|
echo [!] Python dependency install failed - the dashboard still works,
|
|
echo the clicker will not. Retry by hand with:
|
|
echo %PYCMD% -m pip install -r clicker\requirements.txt
|
|
goto :deps_done
|
|
|
|
:deps_skip
|
|
echo [5/6] Skipping Python dependencies ^(python not found^).
|
|
|
|
:deps_done
|
|
|
|
REM ------------------------------------------------------------- autostart
|
|
REM Prompted, not automatic: turning a trading PC into something that rebuilds
|
|
REM and restarts itself on every push to master should be a decision.
|
|
echo.
|
|
echo [6/6] Auto-start and auto-update
|
|
echo Starts AutoFirmer and the clicker at logon, and checks master every
|
|
echo 5 minutes - rebuilding and restarting when it moves. A failed build
|
|
echo is never deployed.
|
|
set "DOAUTO="
|
|
set /p "DOAUTO= Set this up now? [Y/n] "
|
|
if /i "%DOAUTO%"=="n" goto :autostart_skipped
|
|
REM -ExecutionPolicy Bypass applies to this invocation only; nothing machine-wide
|
|
REM changes. No elevation is needed for a per-user scheduled task.
|
|
powershell -NoProfile -ExecutionPolicy Bypass -File "%TARGET%\scripts\install-autostart.ps1"
|
|
if errorlevel 1 (
|
|
echo [!] Auto-start setup failed. AutoFirmer still works - start it with
|
|
echo start-autofirmer.bat, and re-run this script to try again.
|
|
set "AUTOSTART=0"
|
|
) else (
|
|
set "AUTOSTART=1"
|
|
)
|
|
goto :autostart_done
|
|
|
|
:autostart_skipped
|
|
echo Skipped. Run scripts\install-autostart.ps1 later to enable it.
|
|
set "AUTOSTART=0"
|
|
|
|
:autostart_done
|
|
|
|
REM ---------------------------------------------------------------- start file
|
|
> "%~dp0start-autofirmer.bat" (
|
|
echo @echo off
|
|
echo title AutoFirmer - %INSTANCE%
|
|
echo cd /d "%TARGET%"
|
|
echo echo Dashboard starting on http://localhost:3000
|
|
echo call npm run start
|
|
echo pause
|
|
)
|
|
|
|
popd
|
|
|
|
echo.
|
|
echo ============================================
|
|
echo Done.
|
|
echo ============================================
|
|
echo.
|
|
echo Instance name : %INSTANCE%
|
|
echo Reporting to : %MASTER_URL%
|
|
echo Installed in : %TARGET%
|
|
echo.
|
|
echo Dashboard at : http://localhost:3000
|
|
echo.
|
|
if "%AUTOSTART%"=="1" goto :summary_auto
|
|
echo Start it with : start-autofirmer.bat
|
|
echo Clicker : python clicker\runner.py
|
|
goto :summary_manual
|
|
|
|
:summary_auto
|
|
echo Running now, and again at every logon ^(PM2^).
|
|
echo Updates : master is checked every 5 min; see scripts\update.log
|
|
echo Handy : pm2 list ^| pm2 logs autofirmer ^| pm2 logs clicker
|
|
|
|
:summary_manual
|
|
echo.
|
|
echo Still manual:
|
|
echo - Load the Chrome extension: chrome://extensions, enable Developer
|
|
echo mode, "Load unpacked", select %TARGET%\extension
|
|
echo ^(an update cannot reload it for you - the dashboard warns when
|
|
echo the extension or runner is behind^)
|
|
echo - Add your firm credentials on the dashboard's Settings page
|
|
echo.
|
|
pause
|
|
exit /b 0
|
|
|
|
:fail
|
|
echo.
|
|
echo Setup did not complete.
|
|
echo.
|
|
pause
|
|
exit /b 1
|