runTrade now draws each batch from a single account-type prefix group
(largest group first) instead of slicing across prefixes; a group's
remainder fires alone on a later tick. copyTrade fills open slots with
accounts matching the positioned accounts' prefix before mismatched ones.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The reporter already computed targetHit per account to count it as
traded; now it also classifies each account that finished the day flat
and sends targetHit/partial/loss counts per firm and account type. A
realized loss reports as loss even on a grind day where any nonzero PnL
counts as done. Fields are additive, so an older master ignores them.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
When the master marks an account type splitEnabled=false, big days trade
as one unsplit leg (the legacy one-and-done behavior); min-day bumps are
unaffected. Missing field — older master or pre-toggle cached catalog —
defaults to enabled.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
.validate-required is on every required checkout field, so the old selector's
first match was usually a text input, and on the terms row the click landed in
the empty half of a full-width <p> beside the box. Target the checkbox input in
a required row and gate on :not(:checked) so the two clicks tick box one then
box two instead of toggling the same box twice; the second is skipIfNotFound in
case a checkout has only one.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A frame-targeted step resolved the element inside the checkout iframe and
reported that iframe's URL as the result `url`. The signed-out guard keys off
`url` to decide whether the tab is on the login page, and Lucid's checkout
iframe sits on the apex host (lucidtrading.com) that its signedOutPattern
matches — so a signed-in checkout looked signed out, ran the login step, and
failed with no login button present.
Report the TOP tab's URL as `url` (from pageFrameOffset), keeping the child
frame's URL as `frameUrl`. Extension 0.14.0.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The frame-aware step vocabulary only the 0.19.0 runner understands, so the
server must require it too. Missed in the previous commit, which left the
dashboard flagging the restarted 0.19.0 runner as out of date.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Selectors were only resolved against the top document, so steps targeting
the Lucid WooCommerce checkout (rendered in a lucidtrading.com iframe under
the dash.lucidtrading.com app) never matched — e.g. input#coupon_code_field.
Add an optional `frame` on click/type/waitFor naming the <iframe> element.
The extension measures the iframe in the top frame (pageFrameOffset), finds
the element across child frames (pageLocate `relative` mode), and composes
the two into desktop coordinates; the Python side is unchanged since the
result keeps the same shape. Without `frame`, every path behaves as before.
Point the Lucid checkout steps at the frame and harden the coupon selectors
(the exact field id is still unconfirmed against the live iframe).
Extension 0.13.0, runner 0.19.0.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The welcome now carries a personId; it lands in the instance_id setting
and rides on every hello and HTTP report from then on. The master keys
the person by that uuid, so changing instance_name moves our history to
the new name instead of starting a stranger. Read-only in Settings on
purpose — editing it by hand would detach this machine from its person.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Big days (> $1700) now trade as multiple separate legs of random size
(each >= $800, $5-rounded), resumable across pauses since the remaining
target is derived from realized PnL against a day-anchored target.
Min-day targets get a deterministic random $0-25 bump seeded per
(account, trade date) so the dashboard, reporter, and orders agree.
Strict-consistency accounts randomize only their first trade ever.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The master's catalog now labels each firm with a platform (TopstepX being
the first non-Tradovate one). Sync accepts the field, defaulting anything
missing or unrecognized to tradovate so an older master still validates,
and getTradableFirms only hands Tradovate firms to the client.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
This box no longer decides what firms exist. It caches the master's catalog
and stores one thing of its own: the Tradovate login for each firm. Creating
firms locally is gone — app/add, POST /api/firms, the account-config routes
and the banned-symbol route with it.
The cache is the point, not an optimisation. The scheduler needs every
account's target and size on each 60s tick, so fetching them per tick would
stop trading with positions open the first time the master rebooted. It is
one JSON blob in settings, replaced only by a complete valid response, and a
response with zero firms is refused outright: a misconfigured FIRMS_DB serves
{"firms":[]} as a healthy 200, and mirroring that would idle the whole fleet
at once.
Accounts bind to an account type by prefix AND size, the size taken from the
opening funding transaction. That does not arrive with the first sync, so an
account sits Unassigned and the resolver tries again next sync rather than
guessing. A type picked by hand is never overwritten by an auto pass. This
replaces the longest-prefix helper that had been copy-pasted into five files,
which could not tell two types with the same prefix apart at all.
firm_credentials and account_assignments deliberately have no foreign key to
the cached catalog. foreign_keys is ON, so a cascade would erase the Tradovate
passwords the moment a firm was removed on the master — routine, not
exceptional. They survive it, and are re-keyed by name if the master's database
is ever rebuilt with fresh ids.
The legacy firms/account_configs/firm_banned_symbols tables are left on disk,
unreferenced. firms is the only table that ever held plaintext credentials and
dropping it would make a rollback unrecoverable.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The dashboard-hosting stack from the previous commit is gone; it was answering
a question nobody asked. What was actually needed is Chrome's real update
channel, which an unpacked extension does not have and cannot be given.
So the extension is now signed into a CRX with an update manifest beside it,
served from the droplet, and installed on the trading machines by policy
(ExtensionInstallForcelist). From there Chrome installs it, updates it on its
own schedule, and puts it back if it goes missing. The manifest gained the
`key` that fixes the extension id, so an unpacked development load keeps the
same identity as the published build.
The self-update check now branches on how it was installed: policy installs ask
Chrome to check the update server now rather than waiting out its five-hour
cycle, and unpacked loads keep the reload-from-disk path. chrome.management
.getSelf() tells the two apart and needs no permission to do it.
The signing key lives at /opt/autofirmer-updates/key.pem on the droplet and
nowhere else. It is the extension's identity: a different key is a different
extension, and no browser would take it as an update.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Chrome has no update channel for an unpacked extension, so every pull left one
manual step: click reload on its card. The dashboard now publishes the version
its own checkout ships at /api/autobuyer/status, and the extension reloads
itself when it is behind — chrome.runtime.reload() re-reads the folder from
disk, which the update check has already pulled into. It only ever runs code
that is on disk, so a reload that changes nothing is reported and waited out
rather than repeated; a dashboard that is behind is ignored.
Also adds the deploy stack for running the dashboard on the droplet, next to
the autotrader one: it joins that nginx's network and renders a server block
into its conf.d rather than standing up a second ingress. AUTOFIRMER_DB moves
the SQLite file onto a volume, since the working directory in a container is
replaced on every deploy.
And waitFor gained `hidden`: an absent gate matched on DOM presence only, so a
modal that closes by going display:none could never satisfy it. The extension
grew a visibility probe for this — locate cannot answer it, because absent and
hidden are both errors there and a wait gate has to tell them apart.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
First live run reset one account, then failed on the second: the confirm
button never enabled and the step reported it covered by a bare `div`.
reCAPTCHA adds a client to ___grecaptcha_cfg.clients per rendered widget and
removes none, so the second modal leaves two — and the callback walk fired the
first it found, the one belonging to the modal that already closed. The token
goes to a widget nobody is listening to, the live modal never hears it was
solved, and its button stays dark. Iteration 1 worked only because there was
one client to find. Now the newest wins: hook widgets are walked in reverse,
clients sorted by descending key, and the count of candidates is reported so
`2 widgets on the page, used the newest` says plainly when a page is stacking
stale ones.
Also from that run:
- coveredBy printed `div` and nothing else, which diagnoses nothing. It only
ever reported tag and id, and modal backdrops and captcha overlays carry
neither. It now names classes too.
- A covered target gets 8s to clear before the step fails. Most things over a
button are on their way out — a backdrop mid-fade, an overlay closing. This
does not weaken the check: still covered at the deadline still fails, and
nothing is clicked while anything is on top of it.
- The reset list's scroll container is confirmed as a class, so the
class-or-id hedge is trimmed. The run reported it as
`dashboard_body MuiBox-root mui-0`.
Extension to 0.11.1 so the dashboard can confirm the reload took. Runner
VERSION deliberately unchanged — the step vocabulary is the same, and a bump
would raise the mismatch banner for a change that does not need it. The
runner does still need restarting to pick up the covered-retry.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The account list loads a screenful at a time, so a reset count larger than the
first page ran out of rows to click.
Counts the reset buttons rather than the rows, so the run log reports the
number that answers the question — are there enough accounts to reset `count`
times. A stretch of non-resettable rows does not stop it early: `stable` only
advances when the scroller was ALREADY at the bottom and nothing new matched,
and every appended batch pushes scrollHeight past scrollTop + clientHeight.
Simulated at 100 rows with the resettables in the middle, at the bottom, and
at the top only — all four layouts walk the whole list.
The container is named rather than guessed. The list scrolls inside
dashboard_body, not the document, and setting scrollTop on the wrong element
scrolls nothing at all — which fails as a low match count rather than an
error. Spelled as a selector list because the live markup is unconfirmed:
querySelector takes either form, and matching neither fails loudly.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The two Tradeify automations clicked the 2captcha *extension's* solve button
and waited for it to go green. That needed a second extension installed and
signed in, put a real mouse click on a button whose markup is 2captcha's to
change, and gave a run no way to tell "still solving" from "not installed".
Replaced with one `solveCaptcha` step. No mouse: the extension reads the
widget's sitekey out of the page, the dashboard buys a token from 2captcha,
and the extension puts it in the response field and fires the page's own
callback.
captcha-hook.js is the part that earns its keep. A widget rendered
programmatically puts nothing in the DOM — no sitekey, and no callback. Most
pages only enable submit from that callback, so filling the hidden field alone
leaves the page looking unsolved. The hook wraps turnstile/grecaptcha/hcaptcha
`render` at document_start to hold on to what the page passed.
Solves go through 2captcha's residential proxy. Its API rejects host names in
proxyAddress, so na.proxy.2captcha.com is resolved to an IP first (cached);
the gateway was confirmed to work addressed that way.
Covers reCAPTCHA v2 (incl. invisible and Enterprise), hCaptcha and Turnstile.
NOT reCAPTCHA v3: a v3 page carries an anchor iframe with k=, so it is
detected as v2 and would be solved with the wrong task type. Everything else
unsupported fails loudly instead.
The API key and proxy credentials are hardcoded in the captcha route on
request. Unlike the sqlite database, that file is in the repo, so they travel
with it. TWOCAPTCHA_API_KEY / TWOCAPTCHA_PROXY and the settings rows still
override; neither has a field on the Settings page.
Runner VERSION and RUNNER_EXPECTED_VERSION both to 0.17.0 — they are a pair,
and a mismatch shows as a red "restart your runner" banner that blames the
wrong process.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Three changes that ride together because they touch the same surface.
A control link to the master. lib/master-link.ts dials out to
<master>/ws/instance and holds it open, so the dashboard can trigger a trade or
queue an AutoBuyer run here. Commands call the same functions the local pages
call — runTrade, startScheduler, queueRun — so nothing reaches the broker by a
path the UI does not also use. Reports prefer the socket and fall back to the
existing POST, which keeps older masters working unchanged.
startMasterLink is idempotent, and that matters more than it looks: getClients()
is lazy and starts the link, so the first command re-enters it from inside a
command the live socket is waiting to ack. Tearing the socket down there loses
the ack and reports a trade that actually executed as a failure — which invites
pressing the button twice.
queueRun is lifted out of the automations route so the socket and HTTP share one
copy of the input clamping that decides how many times a purchase fires.
Page capture loses its switch and gains a scope. It now runs every tick, but
only against the active tab of the last-focused window that matches
host_permissions — so it follows the page in front of you and stops when you
switch away, where before it would fall back to any firm tab left open in the
background.
autobuyer_enabled is gone entirely. The AutoBuyer is ready whenever the runner
is; a run happens because someone asked for one. That does mean a queued run
executes as soon as clicker/runner.py claims it, with no second gate — stopping
the runner is now the way to make a machine idle.
Extension to 0.10.0; it needs a manual reload at chrome://extensions.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
One line per account on every sync, which on a multi-firm instance buries
anything worth reading in `pm2 logs autofirmer`. The threshold is still
recorded on the client and still drives the dead-account checks; it just is
not narrated any more.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Instances were started by hand and updated by hand, so they drifted behind
master silently. Now: PM2 supervises the dashboard and the clicker, a logon
task brings them up, and a 5-minute task pulls, rebuilds and restarts when
master moves.
Restarting on every push is only safe because the scheduler now survives it.
It was pure in-memory state (_global.__autoTrader), so any restart silently
stopped automated trading with the dashboard simply showing it as off. It now
mirrors running/action/symbol/stopAfterAll to the settings table, and
resumeSchedulerIfPersisted() picks it back up from the getClients() bootstrap.
No sync-wait was needed there: tick() already skips while a client reports
!syncComplete and while any account holds a position.
A failed build is never deployed — the build runs before anything restarts, so
a broken push leaves the previous build serving.
start-all and update-check both warm the app with a request afterwards. That is
load-bearing: getClients() is lazily bootstrapped, so until something makes an
HTTP request the Tradovate clients, the reporter and the resumed schedule never
start. That was already true of manual restarts.
Logic lives in Node so a macOS or Linux port only needs an equivalent of
install-autostart.ps1. Python deps are hash-guarded, so the common path is one
hash and one import with no network, and failure is non-fatal since only the
clicker needs them.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Fresh installs point at the master dashboard without manual configuration.
Seeded with INSERT OR IGNORE, so existing databases are untouched.
Note that reporter.ts requires both master_dashboard_url and instance_name
to be non-empty, so this alone does not start reporting — instance_name is
still seeded blank and set per machine.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The other 17 symbols still seed, so they remain listed and can be switched
on from the Instruments page — they just start disabled.
Affects fresh installs only: the seed block runs only when the instruments
table is empty, so existing databases keep their current selection.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
`npm run build` failed on a clean checkout, so nothing on master could be
built for production. `npm run dev` does not hard-fail on type errors, which
is why it went unnoticed.
- state route returned client.perContractFees, which has never existed on
TradovateClient on any branch; nothing consumed it
- mapFirmConfig omitted bannedSymbols. Type gap only: the trade path calls
isSymbolBanned() against the DB directly, so bans were always enforced
- initClient's sync callback was sync where the constructor wants
() => Promise<void>
- accessInfo and ws are assigned during async connect/auth, never in the
constructor, so they take definite-assignment assertions
- the socket payload's inline entityType union had drifted five members
behind the indirect-callback union above it, making the 'position' and
'cashBalance' branches unreachable to the compiler. Both now share a
TradovateEntityType alias. Type-only: those handlers ran fine at runtime
Behaviour is unchanged throughout.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
scrollToLoad walks a progressively-loading list to the bottom before the steps
that act on its items run. Stopping is two-part: no new matches appeared AND the
container was already pinned to the bottom — counting alone stops early on a slow
fetch. Hitting the scroll cap is reported rather than passed off as done, so a
later step never works quietly on a partial list.
The scrolling element is usually not the window. Lists like this live in a div
with its own overflow, and scrolling the document does nothing at all, so the
step walks up from a matched item to the ancestor that actually scrolls —
overflow allows it and there is more content than fits — with containerSelector
to name one outright when the guess is wrong. Verified against a page whose
document also scrolls, which is the case that tells the two apart: it found the
inner div and pulled 12 items up to 60 in 7 scrolls.
waitFor gains `absent`, for waiting on something to go rather than arrive — a
modal closing after a reset. It only accepts a genuine "selector matched
nothing"; an unreachable extension looks the same from a distance and would
otherwise satisfy the gate for the wrong reason, sending the next iteration into
a page that still has the modal open.
The locate queue carries a free-form options blob now, so a new kind of request
stops meaning a new column each time.
Also fixes a missing comma in the reset flow that broke the build.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
focus.py raised the first browser in its list that happened to be running. On a
machine with both Chrome and Edge installed that is a coin flip, and losing it is
silent: coordinates measured from a tab in one browser, the click delivered into
a window of the other. It presents as selectors failing for no reason. A VPS with
both installed hit exactly this.
The extension now reports which browser is hosting it, and that travels with the
measurement, so the clicker raises the browser the coordinates actually came
from. Asking for a browser that is not running now fails honestly instead of
quietly raising a different one, and the verification step rejects the wrong
browser coming forward. Chromium, Opera and Vivaldi are recognised alongside
Chrome, Edge and Brave, on both platforms.
diagnose.py answers the question a remote desktop makes hard: whether the mouse
is really moving or the viewer simply is not drawing it. It moves the cursor and
reads the position back from the OS, so the answer does not depend on anything
being rendered, and it reports DPI mode, screen size, whether this is an RDP
session, and whether the browser can be raised at all. Nothing is clicked.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
`button.reset_btn` matched the reset control on any account row; qualifying it
with `.status-failed` keeps the repeat block from resetting healthy accounts.
Next's dev server intermittently answers a 500 while recompiling a route: it
reads a build manifest mid-write and cannot parse it. A single one of those
during the locate poll was fatal, so a blip in the pipeline killed a run partway
through an auth flow on Windows.
5xx responses and dropped connections are now a distinct TransientError, retried
until the step's own timeout. A 4xx still fails immediately — those are verdicts
about the request, not blips. If the errors persist all the way to the timeout,
the message says so rather than blaming a missing extension.
Error bodies are also summarised. A dev-server 500 replies with a full HTML page,
and printing it raw buried the one line that said what went wrong under kilobytes
of script tags.
This makes the client tolerant of the fault, which is not the same as fixing it:
the real answer on an automation host is to run a production build rather than
`next dev`, so those manifests are written once instead of continuously.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
focus.py now verifies on Windows rather than assuming activation worked. Windows
declines to raise a window for a process that doesn't own the foreground — it
flashes the taskbar and the call returns as if it succeeded — so the runner reads
the foreground window's process back and reports a failure instead of clicking
into a background window. Same gap that was fixed on macOS earlier.
The runner also declares itself DPI-aware at startup. Without it Windows reports
a virtualised screen size and rescales the coordinates it accepts, while the
browser keeps reporting CSS pixels; on a display at 125% or 150% the two disagree
and clicks drift further off the further they are from the top-left.
Browser windows are matched on the owning process rather than the window title, so
an editor with chrome.js open is no longer mistaken for the browser. Linux now says
window management is unsupported there, rather than reporting no browser found —
pygetwindow has no X11 backend, and "no browser window" reads like Chrome is shut.
The main README gained a section on the AutoBuyer: what the three pieces are, how
to load the extension, and that neither the extension nor the runner reloads
itself when the source changes. That last point has been the cause of most of the
confusing failures so far, so it is called out in Updating too.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Repeat. A `repeat` block runs its steps several times, with the count either
fixed in the config or taken from an input the user sets on the dashboard. The
block is unrolled in resolveSteps before the runner sees it, so the runner needs
no loop, the run's total step count stays honest, and every iteration appears in
the log as its own line — a failure on the third purchase reads as "(3/5)"
rather than as an indistinguishable repeat of the first.
Counts are clamped server-side against the automation's declared min/max, and
expansion is capped at 400 steps and three levels of nesting. Each iteration can
be a purchase, so the number is not taken on trust from the client, and the
confirmation dialog names it before anything runs.
skipIfNotFound on a click or type step tolerates an element that is not on the
page — a cookie banner, a modal that only sometimes appears. Only absence is
tolerated. That distinction needed a new NotFoundError: previously a missing
element, an unreachable dashboard, a missing tab and a covered button all
surfaced as the same DashboardError, and skipping that whole class would mean a
step quietly passing while the extension was down.
Orphaned runs are now reaped. Only one run executes at a time, so a run left in
'running' when its runner went away blocked every future run — restarting the
daemon mid-run deadlocked the queue, which is exactly what happened. The
heartbeat decides: a runner that is gone, or up and reporting idle, is not
driving that run whatever the status column says. Gated on the busy flag rather
than elapsed time alone, since a run sitting in a waitFor gate or a sign-in wait
can legitimately go minutes without progress.
Lucid Trading is scaffolded with no automations yet. One match pattern covers
both its hosts — `*.` matches the apex as well as subdomains, confirmed against
a live tab. Its signed-out pattern is `//lucidtrading.com/` rather than
`lucidtrading.com/dashboard`: the leading slashes anchor it to the start of the
host, and without them the substring also matches dash.lucidtrading.com, which
would abort every step while properly signed in.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Step vocabulary gains `waitFor`: block until a selector exists, then continue.
Nothing is clicked or typed — it is a gate for conditions something outside the
run has to satisfy. Unlike every other step it carries no signed-out guard,
because the things worth gating on often sit on the login page, where that guard
would abort the run at exactly the wrong moment. Honours the dashboard's Stop
button, since a two-minute gate that ignored it would be worse than no gate.
Session handling. A run that lands on the login page must not continue: once
redirected, every selector resolves against a login form, so a click aimed at
"Add Account" hits whatever that form renders in the same place. Runs now detect
the redirect and stop before sending any input, with a distinct SignedOutError
rather than a generic failure.
Two ways out of that state, in order: a firm's `authSteps` run and the failed
step is retried, or — when none are defined — the run pauses for
signedOutWaitSeconds so a human can sign in, then resumes. Auth steps are
verified rather than trusted: they can all "succeed" while the site still
rejects the sign-in, so the session is re-checked before the retry, and the run
stops with "auth steps ran but the session is still signed out" if it did not
take.
That check polls for up to 20s instead of reading once. Submitting a login form
starts a network round trip and then a redirect, so the tab still shows the
login URL for a second or two afterwards; checking immediately failed a sign-in
that was merely in flight, killing run #15 nine seconds after it had actually
worked. Third instance of the same mistake in this system — reading page state
immediately after an action that triggers async navigation.
The runner reports its version in the heartbeat and the dashboard blocks the
buttons when it is behind. A running Python process does not reload when the
source changes, so a stale runner fails on step types it predates; that cost a
debugging round when a navigate step reached a runner that had never heard of
one.
lib/automations.ts carries the Tradeify buy-accounts flow: navigate to the
dashboard, open Add Account, pick the account type and size, enter the account
name, and work through the challenge widget before submitting. Selectors are
authored by hand against the live page.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Turns the autobuyer from a page scraper into something that acts. A dashboard
button queues a run; a desktop process executes it against the real browser.
lib/automations.ts — automations are declarative step lists nested inside the
firm whose site they drive. Steps are click / type / wait / navigate, and they
inherit the firm's tab pattern and URL, so one firm's automation can't act on
another's tab. Adding a button means adding an entry here; the page renders
buttons from the API and the runner receives steps from the server, so neither
needs editing. Runs key on firm:automation — every firm will plausibly have its
own "buy-accounts", and a bare id would resolve to the wrong one.
clicker/runner.py — the daemon behind the buttons. Claims a queued run, works
through the steps, reports each one back for the page's live log. Only one run
executes at a time: two processes driving one physical mouse would interleave
clicks. Heartbeats on its own thread, because a step can block for tens of
seconds and folding the beat into the main loop would show the runner as offline
in the middle of the run it was executing.
clicker/actions.py — one implementation of the safety checks, shared by the CLI
and the runner. Refuses to act when the element is covered by an overlay, when
coordinates fall off-screen, when the browser can't be confirmed frontmost, or
(for type) when the target isn't an editable field.
Typing: uneven human cadence, and the field is read back afterwards and compared
against what was typed — a field that never took focus fails silently and looks
identical to success otherwise. Non-ASCII is rejected because pyautogui skips
those characters without complaint, and newlines because Enter may submit the
form. Typos are deliberately not simulated: a mistyped digit in a trading form
is a real loss, and the correction is the part that can go wrong.
Extension: opens the firm's page when no tab matches, navigates to a specific
page for a navigate step (skipped when already there, so page state survives),
and retries the locate while a freshly loaded React app mounts — `complete` only
means the document loaded.
Staleness reporting, after it cost three debugging rounds: Chrome doesn't reload
an unpacked extension and Python doesn't reload a running process, so both now
report their version. A stale runner gets a red banner naming both versions and
the automation buttons are disabled, rather than failing mid-run on a step type
it predates.
Scale detection is now conservative: a raw OS/browser width ratio is only
trusted when it lands on a real scaling factor. On this multi-monitor desktop
the previous logic would have silently halved every coordinate.
Verified end to end against the live browser: navigate, locate, and a real
click (run #12, all three steps). API round-trips, claim-once semantics, run
cancellation, the heartbeat online/offline lifecycle, motion geometry and
timing, focus activation, and typing verification all pass.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Builds the pipeline the autobuyer needs: see the page, find an element,
click it.
extension/ — MV3 Chromium extension. Polls /api/autobuyer/status and,
while on, scrapes the target tab's HTML and posts it back. Also serves
locate requests: focuses the window, scrolls the element into view, and
reports its position. host_permissions is scoped to tradeify plus
localhost so it cannot read other sites — an empty target pattern would
otherwise capture whatever tab happened to be active, including banking
or mail.
app/api/autobuyer/ — status toggle, capture store, and the locate request
queue. CORS is open because the extension's origin changes every time an
unpacked extension is reloaded.
app/autobuyer/page.tsx — ON switch, source view (default) and a rendered
view. The render uses sandbox="allow-scripts" without allow-same-origin:
the page's own JS is needed because sites ship content at opacity:0 and
fade it in, but the frame must not reach the dashboard's same-origin API
routes, which serve firm credentials.
clicker/ — Python CLI. Asks the extension where a selector is, adds the
element rect to the window's screen position and the browser chrome
height to get desktop coordinates, then clicks with a human motion model
(curved path, eased velocity, occasional overshoot, dwell before press).
Raises the browser application first, since macOS consumes a click on an
unfocused window rather than delivering it.
Refuses to click when the element is covered by an overlay, when the
coordinates fall off-screen, or when the browser cannot be confirmed
frontmost.
Verified: API round-trips, capture pruning, locate claim-once semantics,
motion geometry and timing, and focus activation — the last two against
stubs, since pyautogui and pyobjc are not installed here. NOT verified
end to end: Chrome is still running a stale build of the extension, so a
locate request has never completed against a real page and no real click
has been sent.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
