runClaims claims a same-day type's target and trades its next stage the
same day on the room the claim freed, but the projection paid out once a
day, so Vest's payout calendar showed $1,500 a day instead of $1,500 then
$3,000. Each payout now counts toward its own date, and the same date is
projected again on the next stage, once through the stages a day (the
last one repeats). A cycle that stood complete before today counts
toward today, when it is claimed. Other types project as before.
The account page sums a date's cycles, cuts after the second payout day,
and labels a same-day type's past days from that day's own payout.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
projectPerfectPath and endedCycleCompletion counted every withdrawal ever
made, so a Vest funded account that had claimed on any earlier day was
projected at stage 2's $3,000 forever (labelled stage 3, 4, ...), and a
day's stage-1 cycle that the auto-claim ended before the reporter saw it
was judged against $3,000 and never reported. The projection now takes
the stage inputs: a type whose stages reset each day trades today on
today's payouts and every projected day from the base stage. The catch-up
judges a same-day type's ended cycle on its day's base stage; the stage it
reports stays the payout's number among the account's withdrawals, which
the master clears the entry by. Other types project exactly as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Since a withdrawal stage can carry its own daily loss limit, the engine
places that stop, but the dashboard and report still asked the type's base
limit whether the bot stops at all: with a base of 0 and no obfuscation
options the row showed no "stop $X", and a stopped-out red day read "Flat"
(and counted as a loss, not a personal DLL, in the report). botStopsActive
now takes the stage-resolved config. The state also carries the stage's
daily loss limit and min trading days, which the account page and the Days
column show instead of the type's.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A platform may now state its own stop slippage share
(PlatformClient.stopSlippageFraction); the daily-loss reserve is the
larger of 10% of the limit and that share of the position. Vest's 9
measured stop-outs filled 0.9 points past the trigger on average and
2.25 at worst, against the ~30 points 0.1% held back. On a $1,400 day
with ~$495k of NDX the stop goes from ~$880 to ~$1,230, and the leg
sizes up for the same hold. Sizing, the placed stop, the dashboard's
next stop and the reset guard all use it; other platforms keep 0.1%.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
On a split day the next Vest leg's daily-loss room now adds the day's gain
still in the account to the bot's limit (floorRoom's `gain`), never past
Vest's own floor, and the leg sizes up for the same target hold (Dingo's
next eval leg: $455k -> $842k at 1.5 h, win 28% -> 56%). Other platforms
are unchanged: dllRoom still never widens on a green day.
The gain only widens a leg all but sure to close before Vest's 8 PM ET
reset (resetClearStop, held to the shortest leg the day may carve), and
none of a hand claim's profit counts. The last-stand margin is measured
against the limit, so a green day can't drop a leg's stop.
Around the reset: no new Vest position opens in the last 7 minutes, and
the guard re-fits every 15 s on fresh positions instead of one pass. An
account's positions share the next-day room (stops first, least at risk
first; locked-in profit counts), a hand-moved stop is fitted again, and a
close or profit-side stop that doesn't take is retried or closed.
The dashboard's next stop now reserves for the leg's notional, as fireLeg
does, so DXtrade labels read smaller (display only).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
TopstepX and Tradovate report fills, so a trade is built from them, flat
to flat (lib/fill-trades.ts), off the window each sync already reads:
TopstepX's two days of Trade/search, Tradovate's sync snapshot. Neither
says who placed an order, so every order the bot places is noted in
own_orders, and a trade is the bot's when its opening fill's order is
one; its stop or take-profit closing it reads as such. A contract is
written only when the position before its window comes out the same
two passes running, so a fill landing between the position and history
reads can't build the wrong trades.
DXtrade reports positions: its record groups the last two days' filled
orders by position code, with each close's SETTLEMENT and COMMISSION.
The bot's own orders carry af- codes, so nothing is kept locally. Only
accounts with something going on are read, at most every 5 minutes.
The Trades button shows on every firm with a login, and the account
page lists any account's trades.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A payout locks in profit and opens nothing, so stopping the trading no
longer stops it: a claim watcher runs the same claims once a minute while
the scheduler is off (its tick still claims while it runs), and the
dashboard's Auto-claim payouts box turns them off.
From two independent reviews of the claim path:
- A claim holds every further claim on the account until Vest's
transactions show its WITHDRAW. A sync already out when the claim lands
(by sync generation, not the clock) no longer writes the pre-claim
balance back, and a fresh sync follows the claim.
- A withdraw that fails in transit (timeout, reset, 5xx) may have gone in:
it is recorded as of unknown outcome and holds claims the same way,
until the transactions show it, or an hour of them shows it didn't.
- claimProfit checks Vest's own account: funded (or instant), and no more
than the balance above its starting capital.
- A claiming account is marked in flight; runClaims sends the amount it
re-checked under the mutex.
- The watcher starts before the rest of the init can fail; settings are
validated before any is written.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Vest's position history gives an open position a placeholder close price
and a $0 P&L (290.25 on an NDX short at 29,538.96). Only a closed
position keeps them now — in the parser, in the stored row (a placeholder
already stored is cleared on the next read) and in the API.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
For a payout account on a firm that takes claims by API (Vest), the
account page shows what it could claim right now — its whole profit above
the account size — or why not (not flat, history loading, below its
start). Pressing it asks first, then claims to the login's main account
under the lane's mutex, with the same checks and bookkeeping as the
bot's own claim at a stage's target: the account trades its next stage.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Vest's position history (GET /v3/positions) gives each position's size,
open and close price, P&L, fees, funding and why it closed. The client
reads it hourly and a minute after a position closes (or a flat balance
moves) into a new trades table, and stores open positions as they
appear. Vest can't tell an API order from a click, so the bot marks its
own opens and closes as it sends them; an unmarked trade since marking
began was someone else's.
The dashboard's Vest firm row gets a Trades button listing every trade
on its accounts with who opened it and how it closed; the account page
shows its own.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
On Vest, a claim lowers the daily-loss floor by the amount claimed. Winning
$1,500 and claiming it leaves $3,000 of room the same day, the full
drawdown. The bot now uses that.
- Payout claims: a scheduler step (runClaims, under the lane mutex, before
the flat gate) claims every payoutable account that reached its stage's
target, via a platform that takes payouts by API. The claim is all
profit above the starting balance. It then clears the account's legs and
entry outcome for the day so it can trade its next stage. Failures retry
after 5 minutes. The auto_claim setting 'off' disables it.
- VestClient.claimProfit: POST /v3/capital/withdraw to the login's main
account (account_type 1 on /v3/accounts). The payout is booked at once:
today's fund row and the cycle cut, with today's P&L counted from the
post-claim balance. The history read later rebooks it from Vest's
WITHDRAW row, and the books check counts a claim until that row shows.
- Same-day stages: an account type can pick its stage by the payouts since
the firm's last daily reset (stagesSameDay, sameDayClaims). A stage can
carry its own daily loss limit.
- That limit replaces the type's everywhere room, stops and last stands are
worked out: the batch, the manual leg, copy trade, the dashboard and the
report.
- Room from the platform's own floor: dailyLossFloor (Vest) makes the room
min(stage limit, balance − Vest's floor). A same-day claim that lowers
the floor therefore frees room, and the room is never more than Vest
allows. VestClient.dayStartBalance is gone.
- Before the 8 PM ET reset: from 7:55 PM ET, each open Vest position on an
account with a daily limit is fitted to the room the reset will leave
(resetSafeStop). Its stop comes in via PUT/POST stop-loss, or the
position closes when there is no room.
- Checks for same-day stages, the stage limit, floorRoom, the post-claim
plan, the next reset across both time changes, and resetSafeStop.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A Vest firm's credential is the wallet of the login it trades. It no longer
has to be typed or clicked in: when the extension relays a Vest tab's
session and a Vest firm here has no credential, that wallet is saved as the
credential (lib/vest-wallet.ts), the client starts, and the backup is
pushed.
- A saved wallet is never replaced. When the tab is signed in to another
login, the firm now says which one and how to switch: sign in as the
saved wallet, or remove the credential.
- With two logins relayed at once nothing binds itself; the one-click form
decides.
- Extension 0.17.1 re-posts the session every minute even when it hasn't
changed. The dashboard holds it in memory only, so a restart there was
unauthenticated until the tab's next renewal (up to ~15 min); now it is
back within a minute, and a firm created later binds within a minute too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Vest (next.vestmarkets.com) is a perps prop firm: index, metal and energy
perps on CME hours, plus stocks, FX and crypto. It joins as a fourth
platform, 'vest', on the DXtrade engine paths. Those are now keyed by
isNotionalPlatform() instead of === 'dxtrade': the firm's own symbols,
percent fees, notional sizing from volatility, and a scheduler lane of its
own.
- Login is relayed, not stored. Vest signs people in with Google through
Privy and renews the session with a device key the browser won't export.
Extension 0.17.0's vest-relay.js reads the token the Vest app renews for
itself (~15 min). It renews nothing, so the tab is never logged out. The
background script posts that token to POST /api/vest/session, which holds
it in memory only. With no Vest tab open on a machine that trades Vest,
the extension opens one.
- The firm's credential is the Vest login's wallet address. The dashboard's
form offers the relayed wallet with one click.
- VestClient (lib/vest-class.ts), mapped from the web app's traffic and code
since Vest publishes no API:
- Reads the capital accounts, balances (free amount plus position
collateral), positions and open orders with the user token.
- Mints per-account tokens for orders and transactions.
- Names accounts for their rules (V50K-E-D3-T10-34, V50K-F-D3-34,
V25K-I-7) so account-type prefixes can match.
- Takes Vest's own max-drawdown and daily-loss floors. dayStartBalance =
floor + the type's limit, so the engine's room is never more than
Vest's.
- Uses each symbol's taker fee and margin rate from exchangeInfo, and
hourly volatility over in-session hours only.
- Places take-profit and stop as position legs, which Vest cancels as an
OCO pair.
- Daily P&L and fund rows come from /v3/transactions by Vest's 20:00 ET
day. A books check holds an account, naming the transaction types, when
the balance and the transactions disagree.
- scripts/check-vest.mjs (in npm run check): Vest's day across DST, account
names, parsing, volatility gaps, market hours, the session store.
Not yet run against Vest with a live session: the order and exit bodies
come from the app's code, and the transaction classification from its enum.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Reverts 062ec07 and 5eb0ea7: every firm's broker session stays logged in
around the clock again, renewing its token on the fixed timer as before.
The tree is back to 6dd2528's. A session_rest row left in settings is
unused.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A firm resting across the trade-date roll kept reporting its last snapshot,
so yesterday's realized P&L and DLL lockouts counted as accounts already
traded today (Nik's Topstep read 5/5 traded at 5:31 PM from 3:29 PM data).
Its report is now the unsynced one until it logs back in; a rest within one
trade date reports as before.
/api/health also counts a firm logging back in after a rest as nothing
wrong, within its 15-minute grace, rather than reading not ok for the
seconds before its first sync.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A firm's client used to stay logged in around the clock, renewing on a fixed
timer overnight and at weekends. Now, once a firm has nothing open, nothing
pending and nothing left to trade before its next session for a random
15–45 minutes, its client disconnects and the dashboard shows it Resting.
It logs back in a random 20–50 minutes before the next session opens, at a
check-in every 3–7 Central daytime hours, or at once when trading starts, a
manual leg, copy trade, manual order or AutoBuyer run needs it. Token
renewals fall at random points (Tradovate 15–45 min before expiry, TopstepX
every 45–150 min). Settings → Trading → Rest idle broker sessions
(session_rest) turns it off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every machine sized a like account in a like state to the same position as
every other person's, so two people's positions could match to the unit.
Each person now draws a size factor in [0.85, 1.15] per trade date, seeded
by the master's uuid for them; all of one person's accounts share it.
The factor moves the hold a DXtrade leg is sized for (hold / factor², since
size goes as 1/√hold), so the instrument pick, the dashboard's next leg and
the Firms page's reach test all see the hold the size was made for.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
When the master changes an account type with "New accounts only", it now
serves the type's old rules as kept rule sets (firm.keptAccountRules), each
for accounts dated inside [openedAt, closedAt). This build applies them:
- getAccountConfig, the one rules lookup trading reads, puts a kept set's
rule fields over the live type when the account's rules date falls in
its window. Id, label, prefix, size and the projection fields stay the
live type's, so every report still names the live type.
- account_assignments gains rules_date and rules_date_manual. A new row is
dated when the machine first sees the account, on the master's clock
when this one runs behind and never before the catalog's last change.
Auto dates come down to the broker's evidence: the end of the first fund
day in Chicago, or a DXtrade registration instant. Evidence is applied
before an account's first trade. Rows from before the migration get its
time; unpinning keeps the row and its date. Backups carry both columns.
- An account on a kept set stays on its type while its prefix and cached
size still match, so a tie-break flip can't move it off its old rules.
- Kept entries parse through the same normalizer as live types (now
normalizeAccountType in lib/kept-rules.ts); a malformed one rejects the
sync like a malformed type. The cached catalog records the parser that
stored it, and a cache from an older parser is fetched in full rather
than trusted with ?since= (this also brings in maxConcurrentAccounts).
- Reports add keptRuleIds per firm and live counts per kept set per type.
- The dashboard row and the account page show the rules date next to the
account name, with an "old rules" chip saying what differs. Clicking
the date edits it inline (PUT /api/accounts/:id/rules-date), previewing
which rules the date lands on.
Also: the master's per-firm cap on accounts traded at once
(maxConcurrentAccounts), applied on top of the machine's own max
concurrent when a batch is drawn and in copy trading.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
On 2026-10-08 a Tradeify min day ($150) stopped out at −$306 on its 2×
stop of $300. The dashboard then read "stop $912": the next-stop label is
recomputed from the remaining target, which the loss grew to $456, for a
leg that never fires — the day is booked and the make-back rides tomorrow,
stopless.
- obfuscationDayBooked() holds the scheduler's booked-day check; the state
route asks it too and shows no next stop, last stand or hold on a
booked day.
- The account page's "Daily Loss Limit" showed minDayPnL. It now shows the
type's real daily loss limit, with Min Day P&L on its own row; the
objective that passed on total profit ≥ minDayPnL is gone.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
On a firm site, the extension draws a small corner chip with this
machine's person's authenticator code for that site, a countdown, and a
Copy button. It can be minimised to a "2FA" pill for the tab's session.
- /api/autobuyer/otp?host= relays to the master's
/api/otp?person=<instance_id>&host=, which matches the host to a firm's
Site link and the person's assigned codes. No master link, a master
that can't be reached, or no match all come back as no codes. An answer
without scope: 'person' is refused: an older master ignores ?person=
and would return every stored code.
- The chip lives in a shadow root, counts down on its own, refetches
when a code expires, and stays hidden for a minute after the runner
last located something, so automated clicks never land on it. Copy
uses execCommand inside the click, since the async Clipboard API can
stall on a permission prompt, and leaves focus in the site's code field.
- Apex (*.apextraderfunding.com) joins host_permissions, which also
brings it into capture like the other firm sites. Version 0.16.0.
- CatalogFirm mirrors the master's new optional siteUrl.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
One quote feed per machine: a TopstepX client's market hub, else a
Tradovate client's market-data socket, subscribed to every listed root's
front month and the drain micro. A supervisor keeps it on a working client,
dropping one that fails or goes quiet while the market trades.
The Auto draw weighs each instrument by its live spread (the typical tick
when no fresh quote is at hand). No futures entry pays more than the
master's max entry spread ($15 until set) to cross the book: the draw
leaves such an instrument out, an explicit symbol sits the tick out, and
fireLeg and the extra-day trade check it last before sending. The Settings
page and the master's stats show the live spreads and the feed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The rule is: when hitting the day's loss limit would leave the account 15%
of that loss or less above its max-drawdown floor, ride without a
daily-loss stop. It had compared against the stop-out after the 10%
reserve, which made it stricter — $3,294.70 to the floor with $3,000 of
daily room (9.8% left) wasn't a last stand, and now is.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- lib/instrument-specs.ts (pure, tested): the CME specs — point value,
tick size, one-tick spread, Yahoo ticker — replacing POINT_VALUES; the
draw's maths; the 12-hour hold cap; the micro for drain and extra-day
legs; reading a firm's list (the master's, or the old rules against an
older master: this machine's enabled set less bans, the symbol map).
- lib/instruments.ts: the one module the trading paths ask. Measures every
future's daily move from Yahoo's hourly candles once per trade date, and
shows entry cost (a tick of spread plus Tradovate's fee parameters or
TopstepX's last measured fill) without ever choosing by it.
- Futures Auto draws one root per batch from the batch firm's list: movement
per dollar of spread early in the session with a 10% floor each, sliding
to the fastest movers by the last entry; nothing expected to hold 12h or
more; micros only if nothing else is listed. Every draw logs its odds.
- The batch is chosen before its instrument, and a group that can't trade
anything yields to the next. Copy trade matches the held contract against
the listed roots and won't copy an instrument it can't identify. Manual
legs, manual orders and drain/extra-day legs follow the lists.
- DXtrade firms rank their own list whatever root was drawn.
- Capabilities, the dashboard's trade bar and contract resolves follow the
lists; the trade bar and scheduler default to Auto. The master link
reconnects when master_dashboard_url changes, and the catalog drops
?since after a switch so two masters' versions can't collide.
- Reports carry each futures firm's instrumentStats for the master's Firms
page; GET /api/instruments shows them (?simulate=N runs the draw, no
orders); the Settings page shows the lists read-only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- lib/leg-estimate: an account's next leg sized on every surveyed
candidate (planLegSize, ranked by rankForTarget) — notional, its
multiple of the account and the broker's maximum, expected hold, cost
and win chance. The dashboard's hold estimate and the reporter share it.
- The reporter sends it per DXtrade firm as symbolStats, for one live
account from the largest prefix group with a leg left to trade.
- The symbol map's per-symbol commission is gone: the firm's applies.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- A batch sizes its leg on every mapped candidate, each at the leverage
the broker states for it, and trades the cheapest (spread, commissions,
expected swap) that reaches the target hold — else the quickest. The
dashboard ranks the same way from a half-hourly candidate survey.
- Last stand: when a daily-loss stop-out would leave the account within
15% of that loss above its max-drawdown floor (the account type's static
max loss, or the broker's liquidation floor), the leg carries no
daily-loss stop and is sized against the firm's own breach.
- The daily-loss reserve is 10% of the limit or 0.1% of the position,
whichever is more, since a stop's slippage grows with the position.
- The account type's max notional is gone: the broker's margin rates cap
each symbol. planLegSize holds the one sizing rule fireLeg, the pick and
the dashboard share.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Transfers: a close books its SETTLEMENT and COMMISSION under one
transaction code, and keying by the code alone let the commission
overwrite the P&L. Keys now carry the type, so the day-start balance,
daily-loss room, realized P&L, daily history and books check all see
closed-trade profit and loss.
- Volatility from a week of hourly closes (was 48 h), still measured once
per trade date, so one quiet weekend can't triple a hold estimate.
- Each symbol's margin rate from the account's instrument details caps
the position at available funds / rate (Tradeify: 5:1 crypto, 2:1
stocks); the account type's max notional stays as an optional ceiling.
- Firms with overnight financing add the swap a winning leg is expected
to pay (the winners' mean hold, (A²+2AB)/3σ²) to its take-profit, and
the sizing and hold estimate count it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Fires one leg on one account through the scheduler's own fire path (sizing,
take-profit, daily-loss stop, exit bracket), overriding only the one-trade-
per-day rule for unsplit accounts. Flat, history, daily-loss room, trading
hours, a flat lane and the lane mutex still apply. The daily-loss check is
factored out so both paths share it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Each instrument's volatility is measured at the first good sync (or pick) of
a trade date and held for the day, so a day's sizing and hold estimate stay
put. The dashboard shows each DXtrade account's next-leg hold ("hold ~Nh")
with its symbol, notional, volatility and win odds. Accounts the firm has
closed (TERMINATED, EXPIRED, NO_TRADING) read as dead instead of inactive,
and skip the books check.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- DXtrade client (lib/dxtrade-class.ts): REST session login with lockout-safe
backoff, 60s sync of accounts/metrics/positions/orders/transfers, history and
fund transactions from cash transactions, day-start balance at the 22:00 UTC
reset, CLOSE-by-positionCode exits (native OCO group, else a stop-first
emulated pair), a cross-account hedge guard, stray-order reaper.
- Instrument selector: the firm's symbol map lists candidate symbols per CME
root; the cheapest tradable one per unit of recent hourly volatility wins
(spread + 2x commission [+ financing] / sigma).
- Fees: a firm's commission % of notional prices every fee off the fill; the
take-profit is solved in closed form so the leg nets its target.
- Hard daily loss limit per account type: every leg carries a stop keeping the
firm's day inside the limit less a 10% reserve and both fees (rounded in);
a green day never widens it; no room or a refused bracket flattens.
- Notional sizing where the platform prices positions: target-hold volatility
sizing or the symbol map's fixed notional, under a per-type notional cap.
- Every-day firms trade weekends/holidays; the scheduler runs lanes (futures,
one per DXtrade firm) with their own hours, flat gate, mutex and batches.
- The catalog sync skips platforms this build doesn't know instead of treating
them as Tradovate. One shared fireLeg replaces the duplicated batch/copy code.
- npm run check: fee/stop/sizing/hours/selector checks; scripts/dxtrade-smoke.mjs
confirms the API against a real login before trading.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Fifth review round (1eb0736):
- An entry now has three outcomes. Filled (confirmed): one-and-done is done
for the day. Never placed: leg taken back, free to retry. Unknown (an ack
or fill that never came back): the account — any mode — is held until a
good sync at least 90s later shows it flat with realized P&L unchanged,
then the leg is taken back and it may retry. Stop-after-all counts it in
play meanwhile. This closes both the day-long bench of 52ed9c7 and the
stacked re-entries of 1eb0736.
- Tradovate cancels an acked order whose fill didn't come within 30s (as
TopstepX already does), so a retry can't sit beside a still-working one.
- A wipe keeps the rebuild's guards: wipeAccountData leaves the Cash History
baseline, roll base, wipe hold, pre-wipe fund signature and the
resolver's inferred size in account_meta; the routes forget history
before wiping (so the stored rows are still there to read), and a wipe
hold restored after a restart keeps its pre-wipe yardstick.
- Wipe routes take the set of typed accounts before wiping, so an account
the resolver un-assigns mid-rebuild still counts.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Fourth review round (52ed9c7):
- The one-and-done guard counts only entries the broker confirmed filled,
so an entry that timed out or was rejected unfilled no longer benches the
account for the day.
- TopstepX: an account is promoted only by a sync that actually checked its
funds; one with no account type stays out (not traded) without costing a
sync per pass, and once typed waits for that check. Wipe routes don't
count untyped accounts as failures.
- Tradovate: an unchecked balance-hold release needs Cash History refused
for a full hour straight (a 4xx other than 401/403/408/429, or an answer
without data); any other outcome resets it, so one stray reply during a
5xx outage can't release a payout.
- A wipe keeps the pre-wipe baseline and fund rows as its yardstick: the
rebuild must explain today's balance against them, so a payout the
rebuilt report hasn't booked yet stays held.
- The roll base of an unrolled record is kept per trade date in
account_meta, so a restart later the same trade date counts from the same
point instead of from a value that already includes the day's fills.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Both clients track which accounts this process has loaded history for
(historyReady). An account restarted, rebuilt, wiped or newly listed is
ineligible until its fetch lands, instead of trading as a fresh stage-1
first day; a failed fetch with no cache no longer reads as empty history.
Waiting accounts get a targeted fetch on the next sync.
- Tradovate holds an account whose start-of-day balance moves without a fill
(a payout between hourly Cash History runs) until a Cash History books it,
so a payout-pending account isn't re-traded on its ended cycle.
- Wipe routes forget history through the client and count accounts whose
history didn't come back as failures.
- TopstepX sendOrder picks up a fill that arrived before the place response,
and its REST backstop uses the documented Trade/search and Order/search.
- POINT_VALUES: SI 5000 (was 50), M2K 5 (was 10).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Why the autotrader sometimes broke after a weekend until `pm2 restart`:
`next start` only logs uncaught errors, so nothing ever crashed, and a few
paths could leave a client dead for the life of the process.
Tradovate: a closed socket scheduled exactly one re-login, with no catch —
one failure during weekend maintenance (or a rate-limit penalty returned as
a 200 without a token) and the client never came back. connectAndAuth is now
a single-flight loop that never throws: jittered backoff capped at 5 min,
penalty tickets waited out, captcha demands backed off. A 15s watchdog
abandons silent, never-authorized or stuck-closing sockets and stale syncs;
renewal falls back to a fresh login; orders fail fast (OrderNotPlacedError)
on a dead socket and time out instead of hanging; a bad sync answer no
longer wipes accounts and positions.
TopstepX: hub start/stop/invoke and every REST call are bounded; a wedged
hub is discarded and rebuilt; a stuck sync is superseded after 3 min;
re-login no longer tears down the sync loop; a watchdog re-logs when syncs
go stale; a no-fill timeout cancels the order.
Scheduler: one unready client used to hold every firm forever. It now holds
the tick for a 10-minute grace, then trades the other firms without it.
Per-firm try/catch in batch collection, one batch at a time, accounts marked
in flight, legs un-counted only when the entry never reached the broker, and
the scheduler starts before the first batch fires.
Boot and supervision: instrumentation.ts boots the process at server start
(it used to wait for the first dashboard request); a supervisor rebuilds a
client that has been unhealthy for 20 min (not a TopstepX one holding a
position); broker HTTP calls default to a 60s timeout; GET /api/health shows
each client's liveness and the scheduler's last decision. Shared state the
eager boot would otherwise split across bundles lives on globalThis. Logs no
longer carry access tokens or whole AxiosErrors (which include the encoded
Tradovate password).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
cycleCompletion() says whether today's P&L finished the current cycle
(profit target, consistency and minimum days all met) — projectPerfectPath's
completion probe run without and with today. The reporter counts those as
`completed` (a subset of targetHit) and sends their names, so the master
can keep an account a firm erases after it passes. Checked ahead of the
lockout branch: a firm locking a passed account is no DLL loss. The local
dashboard shows them with a purple Completed pill.
Because the master keeps a completion for good, doubtful reads stay
'none': weekends, a Monday with a weekend-dated row, the first minutes
after the 5 PM roll, and history that hasn't freshly loaded.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Matches the master's tokenless-push change: pushBackup no longer waits
for master_backup_token — every instance with a uuid backs up on its
own, and the 5-minute tick force-pushes so a poisoned master copy
self-heals. The token now only gates pulling a backup back (restore),
so setup-linux.sh asks for it only when restoring and the Settings
help text says so.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Four features:
- Backup: lib/backup-sync.ts pushes the full settings table and firm
credentials (the deliberate exception to "credentials never leave the
machine") to the master's bearer-gated /api/instances/backup — every
5 minutes when the content hash changed, within seconds of a settings
or credential edit, and on the new backup-now command. Enabled by the
master_backup_token setting.
- Restore: a dead VPS's replacement pulls the backup and adopts its
uuid/name, so roster, payouts and card links carry on. Pre-boot via
seed-settings.js --restore-from (setup-linux.sh prompts for it) or
the Settings page's restore picker (lib/backup-restore.ts). Stop the
old machine first; the master 409s a live-name rename.
- Proxy: the proxy_url setting routes BROKER traffic only — TopstepX
REST + SignalR hub, Tradovate REST + websocket, Yahoo quotes — via
lib/outbound-proxy.ts (axios agents, undici dispatcher, ws agent).
The master link, reporter, catalog and backup push stay direct, so a
dead proxy cannot take down the control channel. Restart to apply.
- Multi-instance: AUTOFIRMER_DB moves the SQLite file so one checkout
runs N instances; scripts/instances.json (per-device, gitignored)
drives start-all/update-check, and add-instance.sh / remove-instance.sh
manage the extra PM2 processes. Absent registry = single-instance
behavior, unchanged. Instance 1 keeps port 3000 for the clicker and
extension.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Replace the single hardcoded signed-out check with a guards list on each
firm: any guard can trip mid-run via a URL substring (checked on every
step) or a selector probe (checked when a step fails). Each guard defines
recovery steps or a human-wait fallback, a per-run trigger cap, and a
resume policy — 'continue' retries the tripped step, 'restart' rewinds
the run to step 1.
Runner bumped to 0.20.0; the server still ships the legacy
signedOut/authSteps shape for stale runners, and a new runner synthesizes
a guard from a legacy payload.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The MLL floor no longer recomputes while a position is open or while
the balance disagrees with the books beyond fee noise — the last
settled floor stands, so balance ≤ floor can only come true when a
booked fill crosses a settled floor (Topstep's own liquidation fill
included). The floor also survives canTrade flipping off, so a blown
account stays ☠ instead of demoting to inactive.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
TopstepX never reports the Maximum Loss Limit, but it's deterministic:
floor = min(0, eodBalanceHigh − trailingDrawdown), locking at the $0
starting balance. The EOD curve rebuilds from daily P&L + fund events,
with off-book fee drift spread across days proportionally to reported
fees (validated against a platform-reported MLL to ~$0.10). Stored in
autoLiqThresholds — negative, or +$0.01 once locked — so dead detection,
dashboards, and the ruin model's startThreshold all use the real room.
Guards move from '> 0' to '!== 0'; 0 still means no floor. canTrade=false
accounts are skipped. daily_pnl gains a fees column for the weighting.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
An eval that completes its target passes to the next account rather than
paying out — the projected completion marker reads 'Passed ✓' unless the
type is marked payoutable on the master.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
- projectPerfectPath books each cycle's payout ON its final trading day
and anchors ruin probabilities to the platform's real liquidation floor
(Tradovate auto-liq) when reported, else the configured trailing
drawdown with the maxLoss/$2,000 fallback
- Account calendar shows the cumulative reach % on every projected day,
caps the projection at two payouts ahead, and renders potential days
as dashed outlines instead of shaded cells
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
projectPerfectPath prices every projected withdrawal as
min(withdrawalPct × equity profit, cap) × profit split, and tracks the
cumulative probability of reaching it under the fair-walk ruin model —
room/(room + dayTarget) per day (the per-leg product telescopes), trailing
threshold locked at breakeven after the first withdrawal, no obfuscation
branches. The reporter attaches the first 6 payouts per account so the
master's payout calendar renders real amounts and probabilities instead of
one static expectedPayout.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
- TopstepXClient (ProjectX Gateway): API-key auth, SignalR user hub,
Trade/search daily P&L, emulated OCO exits, books-invariant
withdrawal detection for $0-start accounts
- Platform-aware client pool, credentials (api_key column), and
credential form; $0-size account types match by prefix alone
- Drain stages: min-day ($5-$15 randomized) MNQ legs for the
configured days, then wait for the 50% withdrawal; stage pills
show 'Stage N – Drain'
- Account calendar projects the perfect path: future days book their
planned targets, simulated 50% withdrawals, payout marker
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Stop-enabled accounts show an amber "stop $X" beside the day target:
the day-1 net floor (live against realized P&L) or 2x a min-day's
target, mirroring exactly what the trade path will place — and nothing
when the next trade rides stopless.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
A stop-enabled account whose day booked red via its own stop shows an
amber "Personal DLL" badge on the dashboard (the firm's lockout keeps
its red "Hit DLL") and reports as personalDll in the day outcomes
instead of loss, per account type and per firm.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
